ANALISIS TEMPERATUR PADA PROSES TERBENTUKNYA BAHAN BAKAR MINYAK (BBM) DENGAN METODE PIROLISIS PADA PROTOTYPE ALAT PENGOLAH LIMBAH PLASTIK MENJADI BBM

Dawi Yanti, Adelia Rohani, M Saleh, Mohammad Lutfi

Abstract


The physical properties of plastic waste that is not easily biodegradable is a serious problem in pollution on land and at sea. Therefore, technology to be able to solve these problems needs to be developed. This study aims to understand at what temperature plastic waste can produce fuel oil. The type of waste used in this research is polyethylene terephthalate (PET), which is a type of plastic that uses drink bottles. The design of the device to convert plastic into fuel oil in this study consisted of 3 components, namely a valve which functions to regulate the flow of steam from the reactor tube to the condensate tube, the temperature gauge functions to measure the temperature contained in the reactor tube, and the heat blanket functions as a coating, this can reduce excessive heat in the reactor tube. The results revealed that at a temperature of 100ºC to 150ºC with a variation of time (26.3, 27.3, and 28) minutes did not produce oil. At a temperature of 200ºC to 250ºC with time variations (33, 34, and 35) minutes, the condensate tube begins to produce fuel above the water surface.


Keywords


Plastic; pyrolysis; polyethylene terephthalate (PET); and temperature

Full Text:

PDF

References


Dewi, I. N. D. K. (2017). Karakteristik Minyak Hasil Pirolisis Batch Sampah Plastik Polystyrene. Energy-Jurnal Ilmiah Ilmu-Ilmu Teknik, 7(1), 52-55.

Fadhilah, A., Sugianto, H., Hadi, K., Firmandhani, S. W., Murtini, T. W., & Pandelaki, E. E. (2011). Kajian Pengelolaan Sampah Kampus Jurusan Arsitektur Fakultas Teknik Universitas Diponegoro. Modul, 11, 269246.

Lutfi, M., Yamin, M., Rahman, M., & Popang, E. G. (2018). A comparative analysis of the quality of concrete blocks produced from coconut fibre, oil palm empty fruit bunch, and rice husk as filler material. In MATEC Web of Conferences (Vol. 195, p. 01019). EDP Sciences.

Saputra, A. J. (2016). Analisis Pengaruh Pengetahuan Konsumen Terhadap Keputusan Pembelian Kostum Sepakbola Daur Ulang Nike Di Kota Palembang Dengan Menggunakan Sikap Konsumen Sebagai Variabel Mediasi (Doctoral dissertation, Universitas Katolik Musi Charitas Palembang).

Suminto, S. (2017). Ecobrick: solusi cerdas dan kreatif untuk mengatasi sampah plastik. Productum: Jurnal Desain Produk (Pengetahuan dan Perancangan Produk), 3(1), 26-34.

Surono, U. B. (2013). Berbagai metode konversi sampah plastik menjadi bahan bakar minyak. Jurnal Teknik, 3(1), 32-40.

Surono, U. B., & Ismanto, I. (2016). Pengolahan Sampah Plastik Jenis PP, PET dan PE Menjadi Bahan Bakar Minyak dan Karakteristiknya. Jurnal Mekanika dan Sistem Termal, 1(1), 32-37.

Tyree, J., Johnson, S. V., Pascua, M. C. L., Rahaman, M. M., Tenorio, A. L., & Lutfi, M. (2013). Effectiveness of camanava flood control project: A case study of selected flood control structures during typhoon gener and monsoon rains in August 2012. 国際協力研究誌, 19(3), 131-145.

Wahyudi, J., Prayitno, H. T., & Astuti, A. D. (2018). Pemanfaatan limbah plastik sebagai bahan baku pembuatan bahan bakar alternatif. Jurnal Litbang: Media Informasi Penelitian, Pengembangan dan IPTEK, 14(1), 58-67.


Refbacks

  • There are currently no refbacks.