RANCANG BANGUN PROTOTIPE MESIN PLUTO (PLASTIC-TO-OIL)

Nurjanah Nurjanah, Dawi Yanti, Adelia Rohani, M Saleh, Ranjiv Maulana, Ain Sahara, Dhaffa Bhanu Pangestu, Mohammad Lutfi

Abstract


The increase in plastic waste demands acceleration of waste recycling technology. The purpose of this research is to make a prototype machine to process plastic waste into liquid fuel using the pyrolysis method called the Pluto (plastic to oil) engine. This machine can accommodate plastic waste with a maximum weight of about 3 Kg with a condensate tube that can accommodate a maximum volume of about 3 L of liquid fuel. Experimental results reveal that the heating process for 2 hours produces 250 mL of liquid fuel.


Keywords


Pluto (plastic to oil); plastic waste; liquid fuel

Full Text:

PDF

References


Kiran, N., Ekinci, E., & Snape, C. E. (2000). Recyling of plastic wastes via pyrolysis. Resources, Conservation and Recycling, 29(4), 273-283.

Koo, J. K., Kim, S. W., & Seo, Y. H. (1991). Characterization of aromatic hydrocarbon formation from pyrolysis of polyethylene-polystyrene mixtures. Resources, conservation and recycling, 5(4), 365-382.

Lutfi, M., Afifah, R. S., Sulaiman, B., & Risna, B. (2018). Numerical simulation of hydrodynamic for abrupt bathymetry in Palu river estuary. Indian J. Sci. Technol, 11, 1-5.

Qureshi, M. S., Oasmaa, A., Pihkola, H., Deviatkin, I., Tenhunen, A., Mannila, J., Minkkinen, H., Pohjakallio, M., & Laine-Ylijoki, J. (2020). Pyrolysis of plastic waste: Opportunities and challenges. Journal of Analytical and Applied Pyrolysis, 152, 104804.

Imanuell, R., & Lutfi, M. (2019). Analisa Perawatan Berbasis Keandalan Pada Sistem Bahan Bakar Mesin Utama KMP. Bontoharu. JST (Jurnal Sains Terapan), 5(1), 36-43.

Sulaiman, B., Bambang, A. N., Purnaweni, H., & Lutfi, M. (2018). The effect of mangrove on fish catch using belat at Teluk Pemedas and Sanipah of Kutai Kartanegara regency, east Kalimantan province, Indonesia. In E3S Web of Conferences (Vol. 31, p. 08029). EDP Sciences.

Sulaiman, B., Bambang, A. N., Purnaweni, H., Lutfi, M., & Mohammed, E. M. A. (2019). Coastal community perception of mangroves in Suli subdistrict, Luwu. Jurnal Pendidikan IPA Indonesia, 8(4), 561-569.

Tyree, J., Johnson, S. V., Pascua, M. C. L., Rahaman, M. M., Tenorio, A. L., & Lutfi, M. (2013). Effectiveness of camanava flood control project: A case study of selected flood control structures during typhoon gener and monsoon rains in August 2012. 国際協力研究誌, 19(3), 131-145.

Udyani, K., Ningsih, E., & Arif, M. (2018, September). Pengaruh Temperatur Pirolisis Terhadap Yield Dan Nilai Kalor Bahan Bakar Cair Dari Bahan Limbah Kantong Plastik. In Prosiding Seminar Nasional Sains dan Teknologi Terapan (pp. 389-394).

Yanti, D., Rohani, A., Saleh, M., & Lutfi, M. (2022). Analisis Temperatur pada Proses Terbentuknya Bahan Bakar Minyak (BBM) dengan Metode Pirolisis pada Prototype Alat Pengolah Limbah Plastik Menjadi BBM. PETROGAS: Journal of Energy and Technology, 4(2), 72-78.




DOI: https://doi.org/10.58267/petrogas.v5i1.145

Refbacks

  • There are currently no refbacks.