STUDI LABORATORIUM PENGARUH TEMPERATUR TERHADAP PROPERTIES LUMPUR KCL POLYMER

Yandri Yohanes, Rohima Sera Afifah, Risna Risna, Amiruddin Amiruddin

Abstract


This study investigates the effect of temperature on the properties of KCl polymer-based drilling mud, focusing on maintaining the stability of these properties under varying temperature conditions. Five sample variations were tested: Sample A at room temperature, Sample B1 at 150°F, Sample B2 at 200°F, Sample B3 at 250°F, and Sample C at 250°F with the addition of selected additives. The B series samples showed a decline in mud quality as temperature increased, with Sample B3 falling outside the required specification limits for plastic viscosity, yield point, gel strength, and API filtrate due to high-temperature effects. To address this, additives were introduced in Sample C to enhance the composition and stabilize the mud properties. As a result, Sample C met the required specifications with plastic viscosity of 14 lbs/100ft², yield point of 32 lbs/100ft², gel strength of 9 lbs/100ft² after 10 seconds and 12 lbs/100ft² after 10 minutes, and API filtrate of 5.2 cc/30 minutes. The mud properties must be maintained to prevent hole problems in the formation during drilling operations

Keywords : Mud Fluid, Mud Properties, Tempreature


Full Text:

PDF

References


Apriandi Rizkina Rangga Wastu , Ridha Husla , Lilik Zabidi, Abdul Hamid (2020). STUDI LABORATORIUM PENGGUNAAN LUMPUR SMOOTH FLUID 05 DAN SARALINE PADA TEMPERATUR TINGGI, Jurnal Petro.

Arif L, Buntoro A, Sudarmoyo, Rubiandini RRS (2001). Penelitian Sifat- Sifat Rheologi Lumpur Filtrasi Rendah Pada Temperatur Tinggi. Proceeding Simposium Nasional IATMI. Okt 3-5:67-73.

Fitrianti (2020), PENGARUH LUMPUR PEMBORAN DENGAN EMULSI MINYAK TERHADAP KERUSAKAN FORMASI BATU PASIR LEMPUNGAN (ANALISA UJI LABORATPORIUM), Teknik Perminyakan, Fakultas Teknik, Universitas Islam Riau, Jurnal of Eart, Energy, Engineering.

Ir. Bayu Satiyawara (2018). Pengatuh Tempreatur Terhadap Sifat Fisik Sistem Low Solid Mud Dengan Penambahn Additive Biopolimer dan Bentonite Extender, Teknik Permiyakan, Fakultas Teknologi Kebumian dan Energi, Universitas Trisakti.

Kemendikbud. Lumpur Dan Hidrolika Lumpur Pemboran. 1st ed. Indonesia. 2013. 158 p.

M. Mahlil Nasution, Aly Rasyid, Gigin Pahrudin (2021). Desain Formulasi Lumpur Untuk Pemboran Panas Bumi Di Sumur GG-01, Jurnal Bhara Petro Energi.

Ryan Raharja , Sugiatmo Kasmungin , Abdul Hamid (2018), ANALISIS RHEOLOGI LUMPUR LIGNOSULFONAT DENGAN PENAMBAHAN LCM BERBAHAN SERBUK GERGAJI, BATOK, DAN SEKAM BERBAGAI TEMPERATUR. Jurnal Offshore.

Andy Wirawan, ANALISIS PENYEBAB STUCK PIPE DAN PENANGGULANGANNYA PADA SUMUR PDW-07 LAPANGAN PAGARDEWA PT. PERTAMINA EP, Tesis, TEKNIK PERTAMBANGAN FAKULAS TEKNIK UNIVERSITAS SRIWIJAYA. 2015

Dwita, AnalisIs Upaya Dalam Mengatasi masalah Pipa Terjepit Pada Pemboran Trayek 6” Smur X-ST Lapangan Z, Teknik Perminyakan, Universitas Trisakti, Jakarta

Hendra Gunawan, Evaluasi Perbandingan Penanggulangan Well Kick mengunakan metode Concurrent Dan Data Aktual Pada Sumur HE Lapangan, Tesis, Universitas Islam Riau. 2020

Ir. Bayu Satiyawara, Galih Imanurdana, EVALUASI PENYEBAB HILANG SIRKULASI LUMPUR DAN PENANGGULANGANNYA PADA PEMBORAN SUMUR-SUMUR LAPANGAN MINYAK “X”, Teknik Perminyakan, Fakultas Teknologi Kebumian dan Energi, Universitas Trisakti.. 2018

Rizky Wardani, EVALUASI PENGARUH TEMPERATUR TERHADAP SIFAT FISIK LUMPUR KCL- POLYMER UNTUK SUMUR “X” LAPANGAN “Y” PADA LUBANG 17 ½”, 2017




DOI: https://doi.org/10.58267/petrogas.v7i2.193

Refbacks

  • There are currently no refbacks.